Product Categories

Latest news

Our newsletter

Home > Kraft Tape Dispenser > > Water Activated Tape Dispenser
Water Activated Tape Dispenser
  • Water Activated Tape Dispenser
  • Water Activated Tape Dispenser
  • Water Activated Tape Dispenser

Water Activated Tape Dispenser

Water Activated Tape Dispenser F-1B Kraft Tape Dispenser
  • Detailed description
  • Operation Video

    This water activated tape dispenser F-1B increases productivity and efficiency by simplifying the carton sealing process, and decreases risk of repetitive motion injury, material waste and returns. The manual water activated dispenser has a simplified operating process. Water is emptied from a water bottle as needed to wet the brushes. Some models have a heater on top of the brushes also, to keep the water at the right temperature for the tape. As the tape is dispensed, it is fed across the top of the moistened brushed, proven to be the most efficient way to activate the glue.

    Specifications
    Size: 380*300*250mm
    Weight: 9.0kg
    Available width: 15-110mm, length: 50-1100mm
    Water Brushes: 2 for consistent, uniform tape wetting
    Water Bottle Capacity: 41 ounces (1.2 liters)
    Electrical Requirements: None (optional Top Heater requires electrical power)
    Warranty: 2 year parts, 6 months labor

    ATTENTION
    1. Before using this water tape dispenser, please do carefully read the operating instructions. They contain important indications on installation safety, use and maintenance.
    2. Keep this manual with care for any further reference.
    3. It’s customer’s responsibility to make sure that the personnel who will use the machines read and understand the manual.
    4. The builder cannot be responsible for eventual damage to people deriving from non deservation of the safety norms and the warnings here contained.

    GENERAL REMARKS
    1. This manual water activated tape dispenser is designed and manufactured only to dispense gummed tape, any different use from that advised is not considered specific. PRINCE PACKAGING will not assume any responsibility following an improper use of the machine.
    2. After unpacking, check the integrity of the machine, in case of doubt does not use the machine and enquire directly to the reseller.
    3. Keep the machine away from children and from personnel who are not authorized or adequated in the use of it.
    4. Follow the instruction manual for machine maintenance.

    MOUNTING THE WATER TANK
    1. Before using a new water tape dispenser, wash the moistening brush with cleanser, and rinse it with water.
    2. Insert he brush in the water tank.
    3. Place the lever straight up with your right hand.
    4. Take the water tank with the left hand to the groove in the front of the machine until it touches the back part of the machine.
    5. Lower the water tank till it locks into position.
    6. Let go hold of the feed-in control haulm.

    FILLING THE WATER BOTTLE
    1. Fill the water through the hole with clean water. 
    2. Put a finger on the hole, place the bottle back in its housing ,the water will pour from the bottle to the tank.

    CONTROL OF MOISTENING LEVEL
    Adjust the moistening of the water-activated tape according to the quality of glue and paper. Increase or decrease the water quantity in the tank, and therefore on paper, raise or lower the lever by placing the water bottle in one of the three different positions in the water tank.(minimal, medium and maximum lever)

    PLACING THE MOVING PLATE
    Insert the moving plate with the bent part facing up in its housing placed under the white wheel, pushing it ahead.

    INSERTING ROLLER
    Rolls of gummed paper can be rolled in two different ways:
    With glue facing out the roller should be placed in position A .With glue facing in the roller should be placed in position B.

    LOADING OF TAPE ROLL
    Adjust roll guide plates to the width of tape and place in their seats. Insert the tape in the guide plates so that the paper comes with gummed side down, then insert the gummed tape under the moving plate, pushing it all the way. Make sure that the moving plate presser on the tape.

    REMOVING AND FILLING THE BOTTLE
    Before removing the bottle, make sure that it doesn’t contain water, otherwise cover the filling hole with the finger to avoid outlet of water. Filling the bottle and place it bac in its housing.

    Our water-activated tape dispenser is safe in use. The repairs have to be done in our assistance centers or by specialized personnel; improper repairs could cause accidents to the user.

    No

    Name

    No

    Name

    1

    Brush

    33

    Washer

    2

    Water Tank

    34

    Pressure Roll

    3

    Locking pin

    35

    Washer

    4

    Washer

    36

    Tension Spring

    5

    Circlip Inox

    37

    Washer

    6

    Cover Plate, lower part)

    38

    Hexagon Nut

    7

    Cover Plate, upper part

    39

    Screw

    8

    Weight

    40

    Upper Shear Blade

    9

    Locking Nut

    41

    Upper Shear Blade Frame

    10

    Left-hand Side Cover

    42

    Cover

    11

    Bearing Block

    43

    Moving Plate

    12

    Water Tank Mount

    44

    Roller

    13

    Water Tank

    45

    Rear Wall

    14

    Water Tank Mount

    46

    Sheet Metal Screw

    15

    Rubber Feed Ring

    47

    Guide Plate

    16

    Feed Wheel

    48

    Bottom Plate

    17

    Shaft

    49

    Tension Spring

    18

    Circlip

    50

    Right-hand Side Cover

    19

    Cam gear

    51

    Lower cover

    20

    Sheet Metal Screw

    52

    Dial Ring Metric

    21

    Tappet

    53

    Set Screw

    22

    Shaft

    54

    Stop Segment

    23

    Gear

    55

    Washer

    24

    Ring

    56

    Feed Lever

    25

    Autolock

    57

    Screw

    26

    Screw

    58

    Rubber Foot

    27

    Shear Blade Frame

    59

    Hexagon Nut

    28

    Tension Spring

    60

    Washer

    29

    Upper Drive Wheel

    61

    Rubber Stop

    30

    Shaft

    62

    Screw

    31

    Shaft

    63

    Lower Shear Blade

    32

    Shaft

       
    Payment & Delivery
    • MOQ: 1 Unit
    • Port: Shanghai
    • Payment Terms: T/T, L/C, D/A, D/P, Western Union, MoneyGram, Paypal
    • Packaging Material: Paper
    • Packaging Type: Cartons
    • Delivery: We'll arrange delivery within 3 days on the receipt of payment.

    We Provide
    • Best products and factory price.
    • On-time delivery and the shortest delivery time.
    • 1-year warranty. If our water-activated tape dispenser cannot function properly within 12 months, we’ll offer spare parts for free; and you need to pay for the delivery.
    • OEM and customized service.
    • User manuals will go with relative machines.

    Service
    • QC: All products will be checked before delivery.
    • Compensation: If any unqualified product is found, we’ll pay the compensation or send new qualified products to customers.
    • Maintenance & Repair: In case of any maintenance or repair need, we’ll help to find out the problem and offer relative guidance.
    • Operation Guidance: If you have any problem with operation, please feel free to contact us.
  • Related products